Stahlin Non-Metallic Enclosures

Trough & Wireway

Wireway Stahlin offers a broad range of auxiliary products designed to complement a full non metallic wiring system.
Fiberglass wireway is the perfect complement to wall mount control systems as an environmentally sound wiring pathway with both strength characteristics and corrosion resistance. Stahlin fiberglass wireway is well suited as a protective pathway between non metallic enclosures in applications such as greenhouses, livestock installations, plating rooms and printed circuit board manufacturing. The product features a six by six size in a variety of lengths with a full complement of fittings for typical plant installations.

Wireway Part Dimensions Chart
View Chart

Stahlin Wireway Management System
Wireway.pdf

Trough & Wireway Family

Trough & Wireway Drawing indicating the various part numbers in use.

Trough Fiberglass trough is a useful complement to wall mount control systems
Fiberglass trough is a useful complement to wall mount control systems with the same strength characteristics and corrosion resistance as Stahlin wireway. Made from the same fiberglass pultrusion, trough features permanent end caps as well as a snap lock cover that forms a solid housing. Trough is offered as simple protection to wiring from water, oil, dust or corrosive environments, including greenhouses, food processing, plating rooms, pickling and printed circuit board manufacturing. The basic offering includes a six by six structure that is available in six common lengths.

FT6612 - Fiberglass Trough

Trough Technical Chart
View Chart

PVC Coated Pipe Straps For easy installation
Used to fasten and install wireway systems.

PVC Coated Pipe Straps

PVC Coated Pipe Straps
TroughPipeStrap.pdf

Fiberglass Strut Mounting purposes and support
Fiberglass strut is the finishing complement to both wireway and trough. Used for both mounting purposes and support, this rigid pultruded fiberglass mounting system is designed around three configurations, low profile, medium profile and double profile. A full assortment of accessories from beam clamps to strut cover is available. This rigid support system in completely corrosion resistant.

Fiberglass Strut Technical Information
Strut.pdf

WIREWAY FITTINGS Fittings And Accessories For Stahlin Fiberglass Wireway
It is recommended that Stahlin wireway be supported at intervals not exceeding 10 feet. Vertical runs should be supported at intervals not exceeding 15 feet with no more than one joint between supports. Joining wireway straight sections is accomplished by placing a coupling (C66) over the outside diameter of the wireway. The coupling is predrilled to accept a stainless steel screw. The 7/32" diameter holes in the side of the coupling can be used as a template to field drill the end of the wireway. Wireway fittings can be joined to straight sections in the same manner as joining straight sections. To provide a seal, run a bead of RTV® silicone or equivalent around each coupling (outboard of the fasteners) before assembly. End plates are force fit and can be installed as needed and sealed with RTV silicone. This site uses floating frames